Avago-technologies Cache Protection for RAID Controller Cards Uživatelský manuál stáhnout pdf (Strana 99)

Avago Technologies

- 99 -

Cache Backup Products for MegaRAID SAS+SATA RAID Controllers User Guide

May 2015

Chapter 2: Installing the Cache Backup Products

Attaching the CVFM03 Module to a MegaRAID SAS 9265CV-8i RAID Controller and

Connecting to a Remote CVPM02 Module

2.10.3 Installing the Clip Directly on the Remote Mount Board

Follow these steps to install the clip directly on the remote mount board.

1. Place the remote mount board on a flat, clean, static-free surface.

2. Ground yourself and make sure the system is grounded.

3. Remove the clip and the remote mount board module from the package.

4. Place the clip and the remote mount board module front-side-up on a flat, clean, static-free surface.

5. Hold the clip to line up the screw holes on the clip with the screw holes on the remote mount board, as shown in

the following figure.

Figure 67 Installing the Clip Directly on the Remote Mount Board

6. Secure the clip to the CVPM02 module in three screw holes with the screws and the nuts.

The screws thread through the front of the clip and the remote mount board.

NOTE Center the screwdriver carefully to avoid stripping the screw heads.

Do not overtighten the screws.

Clip

3_00895b-00

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 138 139

Žádné komentáře

Avago-technologies Cache Protection for RAID Controller Cards Uživatelský manuál Strana 99